Pulmonary Tests and Procedures

Peak Flow Measurement

What is peak flow measurement?

Peak flow measurement is a quick test to measure air flowing in and out of the lungs. The measurement is called the peak expiratory flow rate (PEFR). It’s also known as the peak expiratory flow (PEF). Peak flow measurement is mostly done by people who have asthma.

Peak flow measurement can show:

  • The amount of air breathed in
  • The amount of air breathed out
  • The rate at which the air is breathed in and out from the lungs

During the test, you blow forcefully into the mouthpiece of a device. A peak flow meter (PFM) is used most often. This is a small handheld device made of plastic. A PFM is small and light enough to be used almost anywhere. It’s important to use the same PFM on a regular basis. The readings can vary between brands and types of meters. In some cases, the test is done in a healthcare provider's office or a hospital with a spirometer. This device has a handheld mouth piece that’s attached by cord to a larger electronic machine.

An important part of peak flow measurement is noting peak flow zones. Peak flow zones are areas of measurement on a peak flow meter. The goal of the peak flow zones is to show early symptoms of uncontrolled asthma. Peak flow zones are set differently for each person. Your healthcare provider will help determine your peak flow zones. The 3 peak flow zones are noted by color and include:

  • Green. This means “go.” The green zone is 80 to 100 percent of your highest peak flow reading, or personal best. This is the zone you should be in every day. When your measurements are in this zone, air is moving well through the large airways in your lungs. It means that you can do your usual activities and go to sleep without trouble.
  • Yellow. This means “caution” or “slow down.” The yellow zone is 50 to 80 percent of your personal best. Measurements in this zone are a sign that your large airways are starting to narrow. You may start to have mild symptoms, such as coughing, feeling tired, feeling short of breath, or feeling like your chest is tightening. These symptoms may keep you from your usual activities or from sleeping well.
  • Red. This means “stop.” The red zone is less than 50 percent of your personal best. Readings in this zone mean you have severe narrowing of your large airways. This is a medical emergency. You should get help right away. You may be coughing, very short of breath, wheezing while breathing in and out, or having retractions (the muscles between the ribs are working hard to help you breathe). You may also have trouble walking and talking.


Why might I need peak flow measurement?

Peak flow measurement using a peak flow meter is useful for people with asthma. During an asthma flare-up, the large airways in the lungs slowly begin to narrow. This slows the speed of air moving through the lungs. A peak flow meter can help show the narrowing of the airways well before an asthma attack happens. A peak flow meter can help you determine:

  • When to get emergency medical care
  • How well an asthma treatment plan is working
  • When to stop or add medicine as directed by your health care provider
  • What triggers an asthma attack, such as exercise

A peak flow meter can help you manage asthma. It can give you and your healthcare provider information about how open the airways are in your lungs. The PFM can detect small changes in the large airways before you start to wheeze. Using a PFM every day will let you know when your peak flows are starting to drop. This allows you to make early changes in your medicine or routine to help keep asthma symptoms from getting worse. The PFM can also identify the reading at which you need to call your healthcare provider or go to the emergency room.

Your healthcare provider may not advise you use a PFM unless your asthma is moderate or severe and you are manage it with medicine. PFM can also be used to assess other lung problems, such as:

  • Emphysema. This is a chronic lung condition that affects the smallest air sacks in the lungs (alveoli).
  • Chronic bronchitis. This is long-term inflammation of the bronchi. It creates excess mucous and a chronic cough.

What are the risks of peak flow measurement?

All procedures have some risks. The risks of this procedure may include:

  • Having to take in deep breaths may make you feel dizzy or short of breath
  • It may trigger coughing or wheezing

Certain factors may interfere with the accuracy of peak flow measurement, such as:

  • Coughing during the test
  • Poor seal around the mouthpiece while performing the procedure
  • A dirty meter
  • Blocking the mouthpiece with your tongue
  • Use of medicines that open the airways (bronchodilators)
  • Use of a different type or brand of peak flow meter, as measurements may vary among brands and types of meters

How do I get ready for peak flow measurement?

Your healthcare provider will explain the procedure to you. Ask him or her any questions you have. You may be asked to sign a consent form that gives permission to do the procedure. Read the form carefully. Ask questions if anything is not clear.

Tell your healthcare provider if you take any medicines. This includes prescriptions, over-the-counter medicines, vitamins, and herbal supplements.

Make sure to:

  • Not eat a heavy meal before the procedure, if instructed by your health care provider
  • Follow any other instructions your health care provider gives you

Before starting daily peak flow meter measuring, your healthcare provider may have you follow a detailed schedule over 2 to 3 weeks. This is done to find your “personal best” peak flow measurement. This value will be used as a baseline for your daily measurements.

What happens during peak flow measurement?

Peak flow measurement is done 1 or more times daily at the same time of day, or whenever you are having early signs of an asthma attack. Or you should use it when directed by your healthcare provider. Use the peak flow meter (PFM) before taking asthma medicine. Your healthcare provider may advise other times when using a PFM is useful.

In most cases, peak flow measurement follows this process:

  1. Before each use, make sure the sliding pointer on the peak flow meter is reset to the 0 mark.
  2. Hold the PFM by the handle.
  3. Stand up straight.
  4. Remove chewing gum, candy, or food from your mouth.
  5. Take a deep breath and put the mouthpiece in your mouth. Seal your lips and teeth tightly around the mouthpiece.
  6. Blow out as hard and as fast as you can. A “fast blast” is better than a “slow blow.”
  7. Note the number where the sliding pointer has stopped on the scale.
  8. Reset the pointer to 0.
  9. Repeat this 3 times. The 3 readings should be close together. If not, adjust your technique.
  10. If you cough during a measurement, repeat the measurement.
  11. Record only the highest of the 3 readings on a graph or in a notebook. Do not average the numbers together. The highest number is called your peak flow or personal best.
  12. Use the peak flow meter once a day, or as directed by your health care provider. Measure peak flows about the same time each day. A good time might be when you first wake up, or at bedtime.
  13. Clean and care for your meter as instructed.
  14. If you use a new peak flow meter, you will need to find your new personal best value on the new meter.
  15. Your healthcare provider may give you other instructions as needed.

What happens after peak flow measurement?

Note which peak flow zone your measurement falls into. Follow the instructions below:

  • Green. This means “go.” You should continue to follow your asthma plan as directed by your healthcare provider.
  • Yellow. This means “caution” or “slow down.” You should tell your healthcare provider at this time. He or she may tell you to increase or change your medicines. He or she may give you other instructions to help keep your symptoms from getting worse.
  • Red. This means “stop.” This is a medical emergency. You should get help right away. Take your rescue medicine and call your healthcare provider or go to an emergency room.

Your healthcare provider may give you more instructions about what to do for each peak flow zone.

Next steps

Before you agree to the test or the procedure make sure you know:

  • The name of the test or procedure
  • The reason you are having the test or procedure
  • The risks and benefits of the test or procedure
  • When and where you are to have the test or procedure and who will do it
  • When and how will you get the results
  • How much will you have to pay for the test or procedure

  • Bookmark
  • Print

    Find a Doctor

Click the button above or call
1 877 NYP WELL

Top of page